GCSE Physics required practicals are assessed through questions about planning, measurements, graphs, calculations and evaluation—not only by remembering what happened in a classroom. This checklist covers the experimental skills and common practical scenarios to revise, with guidance for AQA, Edexcel and OCR students. Always compare it with the current specification and practical guidance for your exact course.
Overview
Required practical questions can appear in written exams even if you completed the experiment months earlier. You may be shown unfamiliar results and asked to identify variables, select apparatus, draw a graph, calculate a value or explain how the method could be improved.
For every practical, revise five layers:
- Purpose: what physical relationship or quantity is being investigated?
- Method: which apparatus is used, and what sequence of steps produces reliable data?
- Variables: what is independent, dependent and controlled?
- Data: what should be measured, recorded, calculated and plotted?
- Evaluation: what causes uncertainty, random error or systematic error, and how can the method improve?
Do not learn a practical as a script. Learn why each step is needed. For example, repeating measurements is useful because it helps identify anomalous results and allows a mean to be calculated, but repeating a measurement does not automatically remove a systematic error.
How the exam boards compare
| Board | What to check | Revision approach |
|---|---|---|
| AQA | The current GCSE Physics or Combined Science specification and its required practical activities. | Learn the named activity, then practise applying its method and skills to unfamiliar diagrams and data. |
| Edexcel | The relevant Pearson Edexcel specification, core practical guidance and any separate Physics or Combined Science route. | Revise the practical context alongside variables, graph work, calculations and evaluation language. |
| OCR | The correct Gateway or Twenty First Century Science specification and its practical activity guidance. | Check how practical skills are organised and practise interpreting results rather than relying on a familiar experiment name. |
Board requirements and documents can change. The table is therefore a study framework, not a replacement for your specification. Before revising a final list, confirm the exact practical names and assessment guidance on your exam board's official website. This is especially important for combined science, where the required list may differ from the separate Physics course.
Checklist by scenario
1. Measuring density
- Know that density is calculated using mass divided by volume.
- Measure mass with a balance and record the unit clearly.
- For a regular object, measure suitable dimensions and calculate volume using the correct geometric formula.
- For an irregular object, use water displacement where appropriate and read the measuring cylinder at eye level.
- Consider whether the object is fully submerged and whether trapped water or bubbles affect the volume.
- Use a sensible number of significant figures and keep units consistent.
2. Investigating specific heat capacity or heating
- Identify the mass of the material, temperature change, energy supplied and time.
- Use a thermometer or temperature sensor correctly and allow it to reach the material's temperature.
- Reduce heat loss with insulation, while recognising that insulation makes the result more reliable rather than perfectly accurate.
- Record temperature at regular intervals and plot a suitable graph, often temperature against time or energy supplied.
- Explain that electrical energy may be calculated from power and time, depending on the method.
- Compare repeats and identify an anomalous reading before calculating a mean.
3. Resistance and electrical characteristics
- Draw or interpret the circuit, including the correct placement of an ammeter in series and a voltmeter in parallel.
- Measure current and potential difference for several settings of the independent variable.
- Switch off the circuit between readings where heating could change the component's resistance.
- Use the relationship between potential difference, current and resistance when required.
- Plot the correct axes and describe whether the graph is linear, curved or passes through the origin.
- For a component such as a filament lamp, explain that temperature changes can affect resistance.
4. Force, extension and springs
- Measure the original length before adding loads.
- Add forces gradually and record the new length, then calculate extension as new length minus original length.
- Keep the ruler fixed, read the scale at eye level and avoid parallax error.
- Do not exceed the elastic limit if the investigation is intended to find the proportional region.
- Plot force against extension and identify the region in which the quantities are proportional.
- Remove the loads safely and check whether the spring returns to its original length.
5. Motion and acceleration
- Know which variable is changed, such as force or mass, and which motion measurement is recorded.
- Use light gates, motion sensors or a measured distance and timer according to the method provided.
- Repeat timings, calculate averages where suitable and avoid starting or stopping a stopwatch inconsistently.
- Use distance-time or velocity-time graphs correctly; check what the gradient represents before calculating it.
- Control variables such as the track angle, total mass or starting position.
- Explain how friction, reaction time or an uneven track could affect the result.
6. Waves, refraction and measuring wavelength
- Measure several wavelengths across a larger distance and divide by the number of wavelengths to reduce percentage uncertainty.
- Use a ruler or protractor carefully and take readings at eye level where relevant.
- For refraction, identify the normal, measure angles from the normal and keep the block in the same position when tracing rays.
- Distinguish between frequency, wavelength, amplitude and wave speed.
- Describe safety precautions for bright light sources, lasers or electrical equipment as appropriate.
7. Radiation and infrared investigations
- Keep the distance, detector position, exposure time and source arrangement controlled.
- Compare surfaces or materials fairly by changing one factor at a time.
- Record temperature or detector readings at consistent intervals.
- Allow equipment to cool between trials when previous heating could influence the next result.
- Use appropriate precautions around hot equipment and electrical connections.
What to double-check
Before attempting GCSE Physics practical questions, use this compact audit:
- Variables: Can you name the independent, dependent and control variables without confusing them?
- Units: Are distance, time, mass, energy, temperature and current recorded in suitable units?
- Tables: Do headings include units, and are decimal places consistent?
- Graphs: Are the axes labelled, scales even, points plotted accurately and a best-fit line used when appropriate?
- Gradient: Have you used a large triangle on the line rather than two nearby data points?
- Reliability: Have you repeated readings, identified anomalies and explained why averaging helps?
- Validity: Does the method actually test the stated relationship, with other important factors controlled?
- Safety: Is the precaution linked to a real hazard, such as heat, electricity, glass or a bright light source?
Evaluation answers are stronger when they name a specific problem and a specific improvement. “Use better equipment” is weak. “Use a light gate instead of a hand-operated stopwatch to reduce reaction-time error” explains both the limitation and the remedy.
Common mistakes
- Listing apparatus without explaining how it is arranged or used.
- Calling every unusual value an anomaly without checking the pattern of the other results.
- Claiming that repeats remove all errors. They mainly help with random variation; they do not automatically correct systematic error.
- Forgetting to calculate extension rather than recording the spring's total length.
- Using a line joining the first and last points when a best-fit line is required.
- Writing a safety point that does not address the equipment in the experiment.
- Confusing accuracy, precision, reliability and validity. These terms describe different features of an investigation.
- Revising a practical from a different exam board without checking whether its apparatus, terminology or required outcome matches your course.
When practising, answer the question first, then compare your response with the mark scheme. Build a personal list of missed phrases—for example, “control the temperature,” “read at eye level,” “repeat and calculate a mean,” or “use a wider range”—but only use a phrase when it fits the method.
When to revisit
Return to this checklist at four useful points: after completing each practical in class, during your first full GCSE Physics revision cycle, before mock exams and when working through physics past papers. Use past-paper questions to test transfer: a question may present an unfamiliar apparatus diagram but still assess the same skills of variables, measurement, graphing and evaluation.
Also revisit the board comparison before each academic year or whenever your school changes specification route. Check the latest official specification and practical guidance for AQA, Edexcel or OCR, particularly if you study Combined Science rather than separate Physics.
For an action-focused final review, choose one practical and complete this sequence:
- Write its purpose in one sentence.
- Sketch the apparatus and label the measurements.
- Name all three types of variable.
- Describe how you would collect at least five reliable readings.
- Draw the expected graph and label its axes and units.
- Write two limitations and a linked improvement for each.
- Attempt one exam question without notes, then mark it carefully.
Repeat the sequence for the practicals you find hardest. This turns GCSE Physics revision from memorising experiment names into practising the skills that required practical questions actually test.