GCSE Physics Forces Questions: Motion, Weight, Momentum and Hooke’s Law Worked Practice
A-Level PhysicsforcesmotionmomentumHooke's lawworked questionsexam technique

GCSE Physics Forces Questions: Motion, Weight, Momentum and Hooke’s Law Worked Practice

SStudyPhysics Editorial Team
2026-11-21
7 min read

Build a reliable A-level forces workflow with free-body diagrams, worked motion, momentum and Hooke’s law practice, plus an error tracker.

Forces and motion questions become more manageable when you use the same sequence every time: identify the system, draw the forces, choose the model, substitute with consistent units and test whether the answer is physically sensible. This A-level Physics revision guide develops that workflow through worked practice on motion, weight, momentum and Hooke’s law, while showing you what to track after each question set.

Overview

Forces questions often look different because they use different contexts: a car braking, a trolley colliding, a lift accelerating or a spring extending. However, the underlying decisions are usually familiar. You need to decide which objects are being considered, which forces act on them, whether the motion is changing and which equation represents the situation.

At A-level, this usually means moving beyond simple substitution. You may need to resolve forces, distinguish between mass and weight, interpret velocity–time or force–extension graphs, apply conservation of momentum, or explain why a model is limited. GCSE forces questions provide useful foundations, but A-level questions expect clearer assumptions, linked steps and more careful treatment of vectors.

Use the following workflow for most forces and motion calculations:

  1. Define the system. Decide whether you are analysing one object, several objects or the whole interaction.
  2. List the known and unknown quantities. Include directions and units, not just numerical values.
  3. Draw a free-body diagram. Show only forces acting on the chosen object or system.
  4. Select the physical model. For example, constant acceleration, Newton’s second law, conservation of momentum or elastic deformation.
  5. Write the equation before substituting. This makes rearrangements and units easier to check.
  6. Check the result. Consider sign, unit, significant figures and whether the magnitude is reasonable.

What to track

Equations and question types

Keep a running record of the question type you are practising and the equation or principle you used. Common examples include:

Question type or command wordUseful methodCheck before moving on
Calculate speed, displacement or timeUse a motion equation or interpret the area or gradient of a graph.Does the graph quantity have the correct unit?
Calculate accelerationUse a = change in velocity / time, or a constant-acceleration equation where appropriate.Was velocity converted to m/s and time to seconds?
Find resultant forceDraw forces, choose a positive direction and apply F = ma.Have opposing forces been given opposite signs?
Find weightUse W = mg, with g as specified or provided for the question.Have you used mass in kilograms rather than weight in newtons?
Collision or explosionApply conservation of momentum, including direction.Is momentum treated as a vector with a clear sign convention?
Spring extension or force–extension graphUse F = kx in the linear region and interpret gradient where suitable.Is x the extension, not the original length?
Explain or discussState the principle, link it to the evidence and address assumptions or limitations.Have you answered the command word rather than only calculating?

Free-body-diagram checklist

  • Draw the object as a simple box or dot and label it.
  • Include contact forces, weight, tension, drag, thrust or any other force stated or implied by the context.
  • Draw arrows in the correct directions and label their meanings.
  • Do not include forces exerted by the object on something else.
  • Resolve a force only when components are needed; label the angle used.
  • State the positive direction before assigning signs.

Worked practice: graduated examples

Example 1: weight. A satellite component has a mass of 18 kg. Taking g as 9.81 N/kg, its weight is W = mg = 18 × 9.81 = 176.58 N. To an appropriate number of significant figures, this is about 177 N. Weight is a force, so the unit is newtons; mass remains 18 kg.

Example 2: resultant force and acceleration. A 4.0 kg trolley is pulled forwards by 15 N while resistive forces total 3.0 N. The resultant force is 15 − 3 = 12 N forwards. Therefore, a = F/m = 12/4.0 = 3.0 m/s² forwards. Writing the resultant force first prevents the common mistake of using the pulling force alone.

Example 3: momentum. A 0.20 kg trolley moving at 2.5 m/s collides with a stationary 0.30 kg trolley, and they move together afterwards. Initial momentum is (0.20 × 2.5) + (0.30 × 0) = 0.50 kg m/s. Their combined mass is 0.50 kg, so their shared velocity is 0.50/0.50 = 1.0 m/s in the original direction. This solution assumes external impulse is negligible during the collision.

Example 4: Hooke’s law. A spring has spring constant 240 N/m and extends by 0.015 m within its limit of proportionality. The force is F = kx = 240 × 0.015 = 3.6 N. If the extension had been supplied in centimetres, it would need conversion to metres first. Also check that the question refers to extension rather than total length.

Error-log template

After marking a set of questions, record one specific cause for every lost mark:

Date and sourceQuestion typeError categoryCorrectionRetest date
For example: mechanics set, 6 MarchMomentum collisionDirection/signChoose positive direction before adding momenta13 March
Equation / graph / unit / interpretation

Useful categories include equation selection, algebra, graph gradient or area, unit conversion, significant figures, vector direction, free-body diagrams and explanation. A precise category is more useful than writing “careless mistake”.

Cadence and checkpoints

Use a short review after every forces lesson or topic-question session. Mark the work, update the error log and choose two questions that target the most frequent mistake. Redo them without looking at the original solution.

Once a week, complete a mixed set containing at least one motion calculation, one force diagram, one momentum problem and one graph or explanation question. Mixing topics tests whether you can select a method rather than simply repeat a memorised pattern.

Every three to four weeks, use a timed section from an appropriate A-level Physics past paper or exam-board question set. Compare your answers with the mark scheme, then use examiner guidance where available to identify recurring issues in working, units or explanations. Build targeted sets by exam board when wording or required models differ; the guide to A-level Physics topic questions by exam board can help organise this practice.

How to interpret changes

Improvement is not just a higher percentage. Look for changes in the type of marks you lose. If equation errors fall but units remain weak, spend the next session converting every quantity before calculating. If calculations are accurate but explanations are incomplete, practise writing a principle, applying it to the context and stating the consequence.

Separate knowledge problems from performance problems. A knowledge problem occurs when you cannot recall or select the relevant model. A performance problem occurs when you know the method but lose marks through signs, algebra, units, rounding or rushed reading. They need different responses: revise the concept for the first; use slower, structured practice for the second.

For graph questions, track whether the issue is gradient, area, axes, units or interpretation. For practical contexts, track variables, uncertainty and evaluation separately. The resource on A-level Physics uncertainty, errors and significant figures is useful when calculation marks are being lost through data handling rather than mechanics.

When to revisit

Revisit this guide after each mechanics test, at the end of a forces topic and before completing a new batch of physics past papers. Return immediately if you make the same error twice, because repetition usually indicates a process that needs changing rather than a single lapse.

Before an exam, use the checklist as a five-minute routine: define the system, draw forces, choose the model, convert units, show working and check the answer. Keep your error log beside your revision notes and select practice questions that match its top two categories. If your course includes linked energy work, review energy questions and efficiency diagrams alongside mechanics where transfers and power appear in the same problem.

To make this tracker useful over time, schedule a monthly review. Count the errors in each category, note which have reduced and choose one measurable target for the next month, such as “show a signed momentum equation in every collision question” or “write units beside every intermediate value”. This turns GCSE-style forces foundations into a reliable A-level Physics revision routine.

Related Topics

#A-Level Physics#forces#motion#momentum#Hooke's law#worked questions#exam technique
S

StudyPhysics Editorial Team

Physics Education Editor

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.