GCSE Physics Energy Questions: Stores, Transfers, Efficiency and Sankey Diagram Practice
GCSE PhysicsA-Level PhysicsEnergyEfficiencySankey DiagramsPhysics Calculations

GCSE Physics Energy Questions: Stores, Transfers, Efficiency and Sankey Diagram Practice

SStudyPhysics Editorial Team
2026-11-18
7 min read

Learn a reliable method for GCSE and A-level energy questions, including efficiency, power, work done and Sankey diagrams.

Energy questions reward a consistent method rather than guesswork. This guide shows how to identify energy stores and transfers, choose the correct equation, calculate efficiency and power, interpret Sankey diagrams, and review mistakes systematically. The core approach is useful for GCSE physics revision and also provides a firm foundation for A-level Physics Revision, where energy calculations become more algebraic and are linked to mechanics, electricity and practical data.

Overview

In an exam, the first step is to translate the wording into a physical model. Ask three questions:

  1. Which energy store changes?
  2. What transfer is taking place?
  3. Which quantity is the question asking you to find?

Energy is not “used up”. It is transferred between stores or dissipated, usually to the thermal store of the surroundings. For example, when a motor lifts a load, energy is transferred electrically into the motor and then to the gravitational potential store of the load. Some energy is also transferred to thermal stores because of resistance and friction.

This stores-and-transfers language is especially useful when answering explanation questions. It prevents a common error: describing energy as disappearing rather than identifying where it has gone.

For GCSE questions, you may be given an equation sheet, but you still need to recognise the correct relationship and use consistent units. At A-level, the same habits remain important, even when questions combine several equations or require rearrangement.

What to track

1. The quantities, equations and units

Use this comparison table when building your GCSE physics notes or checking an energy question after a practice paper.

QuantityEquationTypical unitsWording clue
Work doneW = Fdjoules (J), newtons (N), metres (m)force moves an object through a distance
Gravitational potential energyΔE = mgΔhJ, kg, N/kg or m/s², man object is raised or lowered
Kinetic energyE = ½mv²J, kg, m/san object speeds up or slows down
PowerP = E/t or P = W/twatts (W), J, seconds (s)energy transferred or work done per second
Efficiencyefficiency = useful output energy ÷ total input energydecimal or percentagehow much of the input is useful
Energy from powerE = PtJ, W, san appliance operates for a stated time

If efficiency is required as a percentage, multiply the decimal answer by 100. An efficiency of 0.72 is therefore 72%, not 0.72%.

2. Unit conversions and wording traps

  • Convert minutes to seconds before using E = Pt or P = E/t.
  • Convert kilojoules to joules when the equation and other values use SI units: 1 kJ = 1,000 J.
  • Use mass in kilograms, not grams, in gravitational potential and kinetic energy equations.
  • Square the speed in ½mv². Do not multiply by v once only.
  • Distinguish useful energy from total input energy in efficiency calculations.
  • Use the vertical height change in ΔE = mgΔh, not the length of a slope or ladder.

3. A reliable question workflow

  1. Write down the known values, including units.
  2. Underline the requested quantity and identify the relevant equation.
  3. Convert units before substituting.
  4. Rearrange the equation symbolically if necessary.
  5. Substitute values, showing the calculation.
  6. Give a sensible answer with a unit and suitable significant figures.
  7. Check the result against the situation. Efficiency should not exceed 100%, and a larger power should mean more energy transferred per second.

4. Worked calculations

Example 1: work done. A constant force of 45 N moves a box 8 m in the direction of the force. The work done is:

W = Fd = 45 × 8 = 360 J.

If the force is not in the direction of motion, check whether the question expects a component of the force. At GCSE level, many questions simplify the situation by stating that the force acts in the direction of travel.

Example 2: efficiency. A device receives 2,500 J of energy and transfers 1,800 J usefully. Its efficiency is:

efficiency = 1,800 ÷ 2,500 = 0.72

percentage efficiency = 0.72 × 100 = 72%.

The remaining 700 J has not vanished. It has been transferred to less useful stores, commonly the thermal store of the device and surroundings.

Example 3: power and time. A heater transfers 36,000 J in 120 s. Its power is:

P = E/t = 36,000 ÷ 120 = 300 W.

Example 4: gravitational potential energy. A 4 kg object is raised through 2.5 m. Taking g as 9.8 N/kg where supplied or permitted:

ΔE = mgΔh = 4 × 9.8 × 2.5 = 98 J.

Use the value of g required by your question or specification. Do not substitute a different value without checking the instructions.

5. Sankey diagram checks

A Sankey diagram represents the size and direction of energy transfers. Before interpreting or drawing one, check:

  • The input arrow is labelled with the total input energy.
  • The useful output is identified clearly.
  • The wasted or dissipated output branches away from the useful pathway.
  • Arrow widths are proportional: a wider arrow represents more energy.
  • The output energies add to the input energy.
  • The diagram uses a clear unit, such as J, kJ or an energy-per-second value if the question is about power.

If the useful output is 600 J from a 1,000 J input, the wasted transfer is 400 J and the efficiency is 60%. A Sankey diagram should show that relationship visually as well as numerically.

Cadence and checkpoints

Energy revision is more effective when it is tracked across several question sets rather than completed once. After each practice session, record the date, exam board or paper source, question type, score, and the reason for each lost mark.

A practical review cycle is:

  • After every question set: mark calculations carefully and label errors as equation choice, unit conversion, substitution, arithmetic, rounding or interpretation.
  • Weekly: complete a short mixed set containing work done, power, efficiency and energy-store explanations.
  • Monthly: attempt a timed section without notes, then compare your errors with previous results.
  • Before a mock or exam period: revisit the two question types that have caused the most repeated errors, rather than simply rereading all your notes.

For A-level revision, add a second column explaining how the GCSE method connects to later topics. For example, work done links to force and displacement, power links to energy transfer rates, and efficiency links to practical investigations and electrical systems.

How to interpret changes

A higher score is useful, but the error pattern explains what to do next. If answers improve only when the equation sheet is visible, practise equation selection from the wording alone. If calculations are correct but units are missing, add a final “unit check” to every solution. If explanations lose marks, use a transfer sentence such as: “Energy is transferred from the ___ store to the ___ store, with some energy dissipated to the thermal store of the surroundings.” Then adapt it to the situation rather than memorising it without understanding.

When a Sankey diagram answer is weak, check whether the problem is numerical or visual. You may understand efficiency but fail to compare arrow widths, or you may draw a plausible diagram that does not conserve energy. Rework the same question by writing the input, useful output and wasted output as an equation first.

Keep a simple tracker with these columns: date, topic, question type, score, recurring mistake, correction, and next review date. A mistake that appears three times is not an isolated slip; it is a revision priority.

When to revisit

Return to this topic after each physics past paper, at least once during a monthly revision cycle, and whenever your specification, equation sheet or teacher’s required terminology changes. Exam boards may present familiar ideas using different contexts, so check the current materials for your course before the main summer exam series rather than relying on an old question format.

Use this action plan:

  1. Choose six questions: one on work done, one on gravitational potential energy, one on kinetic energy, one on power, one on efficiency and one explanation or Sankey diagram task.
  2. Complete them without notes and record units at every stage.
  3. Mark them using the relevant mark scheme, distinguishing a final-answer error from a method mark.
  4. Write one correction for each lost mark.
  5. Schedule the weakest question type for review in seven days.

For further practice, connect this tracker with a GCSE Combined Science physics revision checklist, the guide to GCSE Physics six-mark questions, and A-level resources on building targeted topic-question sets. The aim is not to repeat the same worksheet indefinitely, but to return with a new question set, identify whether the same error remains, and update your revision plan accordingly.

Related Topics

#GCSE Physics#A-Level Physics#Energy#Efficiency#Sankey Diagrams#Physics Calculations
S

StudyPhysics Editorial Team

Physics Education Editor

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.