GCSE Physics Equations Sheet: Meaning, Units and How to Use Every Formula
GCSEPhysicsEquationsFormula SheetUnitsAQAEdexcelOCR

GCSE Physics Equations Sheet: Meaning, Units and How to Use Every Formula

SStudy Physics Editorial Team
2026-11-02
6 min read

A practical GCSE Physics equations sheet covering formulas, symbols, SI units, rearranging, conversions and worked examples for revision.

This GCSE Physics equations sheet brings together the main formulas, symbol meanings, SI units, rearranging methods and worked calculations needed for effective revision. Use it as a practical checklist for AQA, Edexcel or OCR preparation, while checking your own specification and any formula sheet supplied in the exam.

Overview

Knowing an equation is only the first step. In an exam, you also need to identify the quantities in the question, convert them into suitable units, choose the correct relationship and give a sensible final answer. A reliable routine is:

  1. Write down the values given in the question.
  2. Write the equation before substituting numbers.
  3. Convert measurements into SI units where necessary.
  4. Substitute carefully, including brackets and powers.
  5. Check the unit and whether the answer is physically reasonable.

The equations below cover the core relationships commonly used in GCSE Physics and the physics content of combined science. Physics-only students may meet additional relationships or more demanding applications, so use this list alongside your exam-board specification. Equations and permitted formula sheets can change between specifications or exam series; your teacher's current guidance takes priority.

Motion

  • Speed = distance ÷ time — v = s ÷ t. Speed is measured in metres per second (m/s), distance in metres (m), and time in seconds (s).
  • Acceleration = change in velocity ÷ time — a = (v − u) ÷ t. Acceleration is measured in m/s².

Forces and matter

  • Resultant force = mass × acceleration — F = ma. Force is measured in newtons (N) and mass in kilograms (kg).
  • Weight = mass × gravitational field strength — W = mg. Weight is measured in N. Near Earth's surface, use the value of g provided or instructed by the question.
  • Density = mass ÷ volume — ρ = m ÷ V. Common SI units are kg/m³ for density, kg for mass and m³ for volume.
  • Pressure = force ÷ area — p = F ÷ A. Pressure is measured in pascals (Pa), equivalent to N/m².

Energy and power

  • Work done = force × distance — W = Fs, where the distance is measured in the direction of the force.
  • Kinetic energy = ½ × mass × speed² — Ek = ½mv².
  • Gravitational potential energy = mass × gravitational field strength × height — Ep = mgh.
  • Power = energy transferred ÷ time — P = E ÷ t. Power is measured in watts (W).
  • Efficiency = useful output energy ÷ total input energy × 100. Efficiency may also be expressed as a decimal between 0 and 1.
  • Energy transferred = mass × specific heat capacity × temperature change — ΔE = mcΔθ, where c is measured in J/kg°C.

Electricity

  • Charge = current × time — Q = It. Charge is measured in coulombs (C).
  • Potential difference = current × resistance — V = IR.
  • Power = potential difference × current — P = VI.
  • Energy transferred = charge × potential difference — E = QV.

Waves

  • Wave speed = frequency × wavelength — v = fλ. Frequency is measured in hertz (Hz), wavelength in metres (m), and wave speed in m/s.

For a fuller topic-by-topic checklist, compare this sheet with the GCSE Physics revision checklist by topic and exam board.

How to estimate

Use the formula triangle only as a memory aid; writing the algebra is safer when an equation must be rearranged. For F = ma, cover the quantity you need: force is mass multiplied by acceleration, mass is force divided by acceleration, and acceleration is force divided by mass. The same method works for v = s ÷ t, p = F ÷ A and V = IR.

Before calculating, identify the units required by the equation. Convert kilometres to metres by multiplying by 1,000, hours to seconds by multiplying by 3,600, centimetres to metres by dividing by 100, and grams to kilograms by dividing by 1,000. For area, remember that converting a length affects both dimensions: 1 cm² is 0.0001 m². For volume, 1 cm³ is 0.000001 m³.

Keep extra digits on your calculator during the working and round only the final answer, unless the question gives a specific instruction. Include a unit where one is required. If the question asks for a percentage, multiply the decimal result by 100; if it asks for efficiency as a decimal, do not multiply by 100.

Inputs and assumptions

A calculation is only as dependable as its inputs. Make a short data table before substituting:

QuantitySymbolTypical SI unit
distancesm
timets
massmkg
force or weightF or WN
currentIA
potential differenceVV
resistanceRΩ
frequencyfHz
wavelengthλm

Watch for symbols that look familiar but represent different quantities. In W = mg, W means weight; in W = Fs, it means work done. In electricity, V can represent potential difference, while in a wave equation v represents speed. A capital letter and a lower-case letter are not automatically interchangeable.

Do not assume that every formula appears on every combined science or separate physics paper. Build your personal checklist from the specification, classroom formula sheet and recent practice papers. The aim is not to memorise symbols in isolation, but to connect each equation with the physical situation it describes.

Worked examples

Example 1: rearranging a motion equation

A cyclist travels 240 m in 30 s. Using v = s ÷ t:

v = 240 ÷ 30 = 8 m/s

If the question instead gives speed and time and asks for distance, rearrange to s = vt. At 8 m/s for 30 s, the distance is 240 m. This reverse check is useful: multiplying the answer by the time should reproduce the original distance.

Example 2: using squared quantities

A 2 kg object moves at 5 m/s. Its kinetic energy is:

Ek = ½ × 2 × 5² = 25 J

Square the speed before completing the multiplication. A common error is to calculate ½ × 2 × 5 and miss the power of two.

Example 3: electricity and unit conversion

A component has a potential difference of 6 V and a resistance of 12 Ω. From V = IR, rearrange to I = V ÷ R:

I = 6 ÷ 12 = 0.50 A

If the answer choices use milliamps, convert after calculating: 0.50 A equals 500 mA. Do not enter 12 kΩ as 12 in a calculation; convert it to 12,000 Ω first.

Example 4: efficiency

A device receives 500 J and transfers 350 J usefully. Its efficiency is:

efficiency = 350 ÷ 500 × 100 = 70%

State what the output represents. An answer above 100% usually indicates an incorrect input, conversion or rearrangement.

For more practice applying equations to real exam questions, use the guide to using GCSE and A-level Physics past papers to improve your grade and review how mark schemes award method and accuracy marks.

When to recalculate

Return to this equations sheet whenever you begin a new topic, change from revision to timed practice, or find a repeated error in your question log. Recheck your personal list before a mock exam and again before final revision, especially if your school uses a different exam board or distinguishes combined science from separate physics.

After each practice session, record three things: the formula you needed, the unit conversion that caused difficulty, and whether the final answer was reasonable. Recalculate missed questions without looking at the solution, then compare your method with the mark scheme. This turns a static formula sheet into a diagnostic tool.

Keep a printable checklist with four boxes beside every equation: recognise it, rearrange it, use the correct units, explain the answer. Tick a box only after demonstrating the skill in a question. Before the exam, practise a mixed set rather than memorising formulas in topic order. If a specification, formula sheet or permitted-equipment rule is updated, replace the relevant section and continue using the same calculation routine.

Related Topics

#GCSE#Physics#Equations#Formula Sheet#Units#AQA#Edexcel#OCR
S

Study Physics Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.